ServicesDent Repair
Dent Repair in Reedley
A dent can be a small ding or a crease that runs across a door. We look at your car, tell you whether it can be pushed out without paint or needs body and refinish work, and the same person who looked at it does the repair.

Getting the panel back to its original shape
Most dents fall into two groups. If the paint is unbroken and the metal hasn't stretched, we can often work the dent out from behind the panel with paintless dent repair. Your factory paint stays on the car, there's no filler and no color matching, and the repair usually takes less time.
If the paint is cracked or chipped, the dent sits on a sharp body line or panel edge, or the metal has been stretched thin, we use conventional repair. That means pulling and shaping the metal, a thin skim of filler where needed, primer, and paint blended into the panels next to it so the color reads as one.
We're a small shop, so one technician follows your vehicle from the first look to the final wipe-down. The person who explained the repair is the person you talk to when you pick it up.
What our dent repair covers
- An honest look first
- We inspect the dent under shop lighting, check the paint for hairline cracks and look behind the panel for access. Then we tell you which method fits and why.
- Paintless dent repair
- Using rods and leverage tools from behind the panel, or glue tabs from the front, we massage the metal back into place a little at a time. It works best on round, shallow dents with intact paint.
- Conventional body work
- For deeper or creased damage, we pull and reshape the metal, then apply the least filler needed and sand it level with the surrounding surface.
- Paint and blending
- When paint is involved, we match the color to your car's code and blend it into nearby panels. Our paint and refinishing page explains that work in more detail.
- Trim and hardware
- Door handles, moldings and inner panels sometimes come off to reach the back of a dent. We remove them carefully and put them back the way they came.
Signs a dent is worth fixing now
The paint is cracked or chipped
Once the clear coat or paint breaks, bare metal is exposed. Rust can start under the paint and spread well past the original dent.
A crease along a body line
Dents on a styling line or near a panel edge are harder to hide and tend to catch the light. They also take more skill to restore, so it helps to have them looked at before they get worse.
Parking-lot dings adding up
One door ding is easy to live with. Five or six across the doors and quarter panels start to lower resale and trade-in value.
A door or panel that doesn't sit right
If a door closes harder than it used to or a gap looks uneven next to the dent, the damage may go deeper than the skin. That's a case for our collision repair team to check.
You're getting ready to sell or return a lease
Dents are one of the first things a buyer or lease inspector notices. Fixing them ahead of time is usually simpler than haggling over them later.
What affects the price of dent repair
The price of a dent has less to do with how it looks from ten feet away and more to do with what happened to the paint and metal up close. Whether the paint held is the first question we answer. Size, location and panel material shape the rest of the estimate, and we'll go over every line on it with you.
Paint intact or damaged
Paintless repair skips filler, primer and paint, so it usually costs less. Cracked paint means refinishing, which adds materials and time.
How big and how deep
A small, gentle dimple with soft edges can often be worked out in short order. When the metal is pushed in deep or folded into a long crease, it takes many more passes to bring the surface back level without leaving waves.
Where the dent sits
Dents on body lines, panel edges or roof rails are harder to reach and reshape. Some locations require removing trim or interior panels first.
Steel or aluminum
Many newer trucks and cars use aluminum hoods, fenders and doors. Aluminum is less forgiving and needs different tools and a slower approach than steel.
How many panels
Several dents on one panel can often be handled together. Damage spread across multiple panels adds labor and, if paint is needed, more blending.
How a dent repair goes at our shop
- 1
Talk it through by phone
Let us know how the dent happened and which panel it's on. Then we'll pick a day that works for you to drop your vehicle off so we can look at it up close.
- 2
Inspection and estimate
We look at the dent, the paint and the access behind the panel, then write up the estimate line by line. You'll know which method we plan to use before any work starts.
- 3
The repair
Your technician works the metal back into shape, either paintlessly or with body work and refinishing. If we find something unexpected, like hidden rust, we stop and call you before going further.
- 4
Final check and pickup
We check the panel under angled light to catch any waves, clean the car and walk you around the repair. You'll be talking to the same person who did the work.

Dent repair questions
Can every dent be fixed without paint?
No. Paintless repair needs unbroken paint, metal that hasn't stretched too far and a way to reach the back of the panel. We'll tell you plainly if your dent qualifies, and if it doesn't, we'll explain why.
How long will I be without my car?
A simple paintless repair is often finished quickly, sometimes while you wait. Dents that need body work and paint take longer because primer and paint need time to cure. We'll give you a realistic timeline when we write the estimate.
Will the repaired spot match the rest of my car?
With paintless repair, your original paint stays untouched, so there's nothing to match. When we do paint, we mix to your car's color code and blend into the panels next to the repair so the transition isn't visible.
Should I put a small dent through insurance?
Sometimes the repair costs less than your deductible, and paying directly makes more sense. For larger damage, a claim may be worth it. We can look at the dent first so you have real numbers before you decide, and our insurance claims page covers how we work with insurers.
Do you fix dents on bumpers too?
Plastic bumper covers behave differently from metal panels. They're usually reshaped with heat and then refinished. Our bumper repair page covers that work.

Let's take a look at that dent
Describe the damage on the phone, then bring your car by so we can see it. You'll get a written estimate and a straight answer on which repair method makes sense.