ServicesPaint and Refinishing
Paint and Refinishing in Reedley
We repaint scratched, faded and peeling panels so the repair disappears into the rest of your car. The same small crew preps, sprays and polishes your vehicle, so the person who checked your color is the one who signs off on it before you drive away.

Paint that matches the car you already have
A good paint job is mostly the work you never see: sanding, feathering edges, priming and checking the color before a drop of base coat goes on the panel. Skip any of it and you get a door that looks a shade off in the sun or a clear coat that starts lifting a year later.
We handle paint and refinishing for a single scratched bumper cover, a hood and roof burned by years of summer sun, or a whole side after a scrape along a post. Because we are a small shop, the same people stay with your car from the first look to the final polish. Nothing gets lost between a front counter, a prep tech and a painter who never met you.
If the panel underneath is creased or pushed in, we fix that first through our dent repair or collision repair work, then refinish. Paint over damaged metal never lasts.
What the refinishing work includes
- Color match from your paint code
- We start with the factory paint code on your vehicle, then spray a test card and hold it against your car in daylight. Colors drift with age and from one factory batch to another, so the card tells us what the code alone cannot.
- Prep down to sound paint
- We sand away failing clear coat, scratches and any surface rust until we reach a solid layer. Edges get feathered so the new paint has no ridge you can feel with a fingertip.
- Primer and sealer
- Bare spots get primer that bonds to metal or plastic, followed by a sealer that gives the base coat an even color to sit on.
- Base coat, clear coat and blending
- We spray the color, then blend it into the neighboring panels where needed so your eye does not catch a line at the door seam. Clear coat goes over the top to protect it from sun and weather.
- Cure, wet sand and polish
- Once the paint cures, we wet sand out any dust specks and polish the finish to match the gloss of the original paint around it.
- Trim and hardware handled with care
- Emblems, moldings and handles come off before painting rather than being taped around, then go back on. That avoids the telltale tape edge that gives away a quick job.
Signs your paint is ready for refinishing
Clear coat lifting off
Hazy, milky spots on the hood or roof that begin to flake are a sign the clear coat has given out. Once it lets go it keeps spreading, and the unprotected color fades fast.
Scratches that snag a fingernail
A scratch deep enough to catch your nail has cut through the clear coat. Polish will not take it out, and if it reaches bare metal, rust can follow.
Dull, chalky color
Dark finishes like black, red and navy tend to go flat and powdery on the panels that face the sun most. Wax brings the shine back for a few days before the haze returns.
Bubbles under the paint
Little blisters near the wheel wells or around a hood chip mean water has gotten to the metal. Found early, it stays a small spot repair.
A past repair that stands out
A fender that seems fine indoors but looks off in sunlight was probably painted with no test card and no blending. We can refinish it so it sits naturally beside the factory paint.
What affects the cost of paint work
Paint pricing depends far more on preparation and color than on the paint itself. We list each panel and each step on the estimate so you can see where the money goes. If something changes once we sand a panel down, we call you before doing more.
How many panels
One bumper cover is a small job. A hood, roof and trunk lid together take more prep, more material and more time in the booth.
Depth of the damage
A surface scratch needs light sanding. Damage to bare metal, rust or a dent underneath adds bodywork before any paint goes on.
Your color
Solid colors are the simplest. Metallics and three-stage pearls need extra layers and more careful blending to look right from every angle.
Blending into nearby panels
To hide the repair, we often blend color into the fender or door next to it. That adds work, but it is what keeps the panel from standing out.
Trim and parts removal
Cars with sensors, moldings or tightly fitted emblems take longer to take apart and reassemble properly.
How a paint job runs at our shop
- 1
Look it over together
When your car arrives, we circle it side by side with you and show you what needs paint and what is only cosmetic. The estimate is then written panel by panel, so each line tells you what gets refinished and the reason for it.
- 2
Prep and protect
Your vehicle gets washed, the trim comes off, and anything we are not painting is masked, from the glass and wheels to the engine bay. Only then do sanding and primer start.
- 3
Test, spray and blend
Before any color is committed, the test card is held up to your car. Base coat and clear follow, sprayed by the same person who matched your color in the first place.
- 4
Finish and hand back
Once the paint has cured, we polish it, put the trim back and inspect the whole car outdoors in natural light. At pickup we explain how to wash it and when wax is safe to use.

Paint and refinishing questions
Will the new paint really match my car?
We start from your paint code and then spray a test card to compare against your actual car, since sun exposure changes how a color looks over time. Where needed, we blend into the neighboring panels so there is no hard line. We check the result in daylight before calling it done.
Can you fix just the roof and hood where the clear coat is peeling?
Yes. Peeling clear coat is usually worst on the flat surfaces that face the sun, and we can refinish only those panels. We will tell you honestly if other panels are close to failing so you can decide whether to do them now or later.
Do you paint the whole car or only damaged areas?
Both. Most jobs are a few panels, which keeps the cost down and leaves the original factory paint where it is still healthy. A full repaint makes sense when the finish has failed all over or you want a fresh start.
How soon can I wash or wax my car afterward?
A gentle hand wash is fine soon after pickup, but skip automatic car washes and wax for a few weeks while the paint fully hardens. We go over the timing for your car when you pick it up.
Will my insurance cover paint work?
If the paint damage came from an accident or covered event, it is usually part of the insurance claim. Fading or peeling from age generally is not. Our Insurance Claims page explains how we work with your insurer on a covered repair.

Ready to get your color back?
Describe what your paint is doing and we will find a day that works for bringing your vehicle by. From the first walk-around to handing back the keys, the same few people handle your car.